23
HOW TO SET UP THE CONSOLE
Before using the incline trainer for the first time, set up
the console.
1. Connect to your wireless network.
Note: To access the internet, download iFit work-
outs, and use several other features of the console,
the console must be connected to a wireless net-
work. Follow the prompts on the screen to connect
the console to your wireless network.
2. Customize
settings.
Fill in the form on the screen to set the console to
display the desired unit of measurement and your
time zone. Note: If you need to change these set-
tings later, see step 3 on page 29.
3. Log into or create an iFit account.
Provide your email address, and follow the prompts
on the screen to sign up for or log into your iFit
account.
4. Tour the console.
The first time you turn on the incline trainer, dia-
logue boxes on the screen will guide you through
the features of the console. Note: To access the
tour again at any time, touch the profile button in
the lower-right corner, then touch the Settings but-
ton, and then scroll to the How It Works section.
5. Check for firmware updates.
First, touch the profile button in the lower-right
corner to select the settings main menu. Then, see
step 2 on page 30 and select the maintenance
mode. Then, see step 3 on page 30 and check
for firmware updates.
6. Calibrate the incline system.
See step 4 on page 30 and calibrate the incline
system of the incline trainer.
The console is now ready for you to begin working out.
The following pages explain the various workouts and
other features that the console offers.
To use the manual mode,
see page 24.
To use a
map workout,
see page 26.
To use a draw your
own map workout,
see page 27.
To use a distance
or time workout,
see page 28.
To use the workout settings section,
see page 29.
To use the equipment settings section,
see page
29.
To use the maintenance section,
see page 30.
To use the wireless network mode,
see page 31.
To use the sound system,
see page 32.
To connect
an HDMI cable,
see page 32.
To adjust the angle of
the console,
see page 32.
To adjust the cushioning
system,
see page 32.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the incline trainer. The first time you
use the incline trainer, observe the alignment of the
walking belt, and center the walking belt if neces-
sary (see page 35).
Summary of Contents for NTL22116.0
Page 5: ...5...
