background image

23

THE INFORMATION MODE/DEMO MODE

The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also 
allows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.

To select the information mode, hold down the STOP
button while inserting the key into the console. When
the information mode is selected, the main display will
show the following information:  

The left side of the main 
display will show the total
number of hours that the
treadmill has been used. 

The center of the main 
display will show the total 
distance that the walking belt
has moved. 

The right side of the main dis-
play will show an E for
English miles or an M for
metric kilometers. Press the
SPEED + button to change
the unit of measurement. 

IMPORTANT: Make sure
that there is not a letter D in
the main display. 

If a D ap-

pears, the console is in the
“demo” mode. This mode is
intended to be used only
when a treadmill is displayed in a store. When the con-
sole is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the displays and indicators on the console will au-
tomatically light in a preset sequence, although the
buttons on the console will not operate. 

If a D appears

in the display when the information mode is se-
lected, press the SPEED – button so the display is
blank. 

To exit the information mode, remove the key from the
console.

Summary of Contents for NTL29105.0

































Reviews: