HOW TO TURN ON THE POWER
IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room tem-
perature before turning on the power. If you do not
do this, the console displays or other electrical
components may become damaged.
Plug in the power cord (see
page 9). Next, locate the
reset/off circuit breaker on
the treadmill frame near the
power cord. Make sure that
the circuit breaker is in the
“reset” position.
IMPORTANT: The console features a display demo
mode, designed to be used if the treadmill is dis-
played in a store. If the displays light as soon as
you plug in the power cord and switch the reset/off
circuit breaker to the reset position, the demo
mode is turned on. To turn off the demo mode,
hold down the Stop button for a few seconds. If the
displays remain lit, see THE INFORMATION MODE
on page 21 to turn off the demo mode.
Next, stand on
the foot rails of
the treadmill.
Locate the clip
attached to the
key (see the
drawing at the
right), and slide
the clip securely
onto the waist-
band of your clothes. Then, insert the key into the con-
sole. After a moment, the displays will light.
IMPOR-
TANT: In an emergency situation, the key can be
pulled from the console, causing the walking belt
to slow to a stop. Test the clip by carefully taking a
few steps backward; if the key is not pulled from
the console, adjust the position of the clip.
HOW TO ENTER YOUR WEIGHT.
Although you can use the console without entering your
weight, the console will more accurately count the
calories that you burn if you enter your weight. To
enter your weight, first press the ENTER AGE/WT.
button. The words ENTER WEIGHT and the current
weight setting will appear in the main display.
Press the + and – buttons above the ENTER AGE/WT
button to enter your weight. To enter your weight
quickly, hold the buttons down. Once you have entered
your weight, it will be saved in the console’s memory.
Key
Key
Clip
11
Reset
Position
