8
4. Have a second person hold the Left Upright
(84) against the Base (29).
Be careful not to
pinch the Upright Wire (91).
Partially tighten three 3/8" x 4" Screws (3)
with three 3/8" Star Washers (10) into the Left
Upright (84) and the Base (29);
do not fully
tighten the Screws yet.
84
4
10
3
29
3. Identify the Left Upright (84), which is marked
“Left.” Have a second person hold the Left
Upright near the Base (29).
See the inset drawing.
Tie the wire tie in the
Left Upright (84) securely around the end of the
Upright Wire (91). Then, insert the Upright Wire
into the lower end of the Left Upright as you
pull the other end of the wire tie out of the Left
Upright.
3
91
84
84
Wire
Tie
91
91
Wire
Tie
29