8]
Interface/rear side of device:
The BCS 5400 (m) + has been future-proofed thanks to its freely programmable
structure. Battery technologies that are not yet used and batteries that will be only be
used years from now may be used by individually adjusting the parameter sets to suit
future, unknown requirements. The properties on the chip of the adapter or on the main
circuit board that are
relevant are updated to the
state of the art via the
charging strip up to the adapter
using a software update.
An update is possible using a
conventional USB cable
and a PC including user
software. The combination of rotary switch (left in the figure), USB (3.0) interface
(centre of figure), and the network connection provide the system maximum flexibility.
The network interface (right in the figure) is provided for the network connection of the
AM 5400 battery management system and is not important for normal charging.
Notice:
Programming the device and parameter sets in the adapter may only be completed by
trained technical personnel. In case of doubt, ask us directly.