32
Any permanent electrical installation must comply with the latest
national
r
egulations. For your own safety a
registered,
qualified electrician
should
undertake the electrical installation
of this appliance
.
The appliance is supplied with a 3-core mains cable and must be connected to
the electricity supply via a double pole switch having a 3mm minimum contact
gap on each connector.
For UK
and Ireland
only
A Switched Fused Connection Unit to BS 1363 Part 4 is
recommended.
The fuse must be rated at 30 Amps.
The wires in the mains lead are coloured in accordance with the following code:
Brown = L - Live
Blue = N - Neutral
Green and Yellow = - Earth
The connection point must be placed in a position adjacent to the appliance so as
to be readily accessible for an engineer in the event of a breakdown.
Disconnect the appliance from the mains supply before carrying out any
kind of maintenance or cleaning.
Electrical requirements
Summary of Contents for DOI414IX
Page 36: ...NORDMENDE SMART LIVING ...