UsInG tHe clock/pRoGRaMMeR
3)
After
the countdown has stopped, i
f
there
i
s
no
operation
for
2
minutes,
buzzing will stop.
4)
If set duration time before end
time,
end
time
can
only
be
added,
not
decreased. (The max time added can be
after 23h 59m. When end time is longer
than duration time
+ current time,
end
time
can
b
e
decreased
by
pressing
"-"
. It will be decreased until end
time
equals to duration time
+ current
time
+ 1 minute). If end time is longer
than duration time
+ current time,
power
will be off, end time icon will
display.
When end time equals to
duration time
+
current time, power will
be on again, end
time icon will turn off.
Time function
1)
Press
to choose
the
time
function.
Time
icon
will
flash,
press
"+"
and "-"
to set time. The range is
24hrs.
Press once to plus or minus 1,
hold
for 3 seconds for quick-adjust. No
operation for 5 seconds, the time of day
will show, time icon will turn off.
2)
If
t
he t
ime
setting
is
changed
afte
r
setting the alarm, duration and end time,
the alarm will not be changed and
duration and end time will reset.
Lock function
Press lock button for 3 seconds any
time, the lock function will active and
lock icon will display. Press lock button
for 3 seconds again, it will be unlock.
The icon turns off. While in lock mode if
any
button
is pressed it
will cause
a
buzzing, while the lock icon will flash
for 3 seconds.
Other notification
1) When
setting alarm, duration time and
end
time, alarm time will display
along
with
alarm,
duration, end time icons will
display.
2)
After setting
the
alarm, duration, and
end
time, Button 1 can be pressed to
check
and change alarm time, duration
time,
end time and day time.
3)
When the duration time and alarm time
are set at the same time, if the duration
time is finished after the alarm time, it will
only be buzzing for the alarm time when
the alarm time ends. If the duration time
is finished before the alarm time, it will
also only be buzzing for the alarm time
when the alarm time ends.
21
