Heated Hoses PG...
8
E
1998 Nordson Corporation
All rights reserved
45--PG--MA--01 (formerly PG...)
Issued 10/98
P/N 317163B
Maintenance
WARNING:
Allow only qualified personnel to perform the
following tasks. Observe and follow the safety instructions in
this document and all other related documentation.
NOTE:
Maintenance is an important preventative measure for
maintaining operational safety and extending the lifetime of the unit. It
should not be neglected under any circumstances.
WARNING:
Hot! Risk of burns. Wear heat-protective gloves.
WARNING:
Risk of fire! Deposits of hot melt or other materials
can cause overheating.
1. Remove all dust and dirt deposits from the hose.
2. Remove all hot melt material residues from the hose and fittings. If
necessary, heat with an air heater until soft.
1. Check all hoses and fittings for leakiness. Replace leaking hoses.
Tighten screw connections if necessary. Use a second open--jawed
wrench.
2. Check electrical plug connections for tightness.
1. External Cleaning
2. Condition Check
