Repair
6-17
E
2003 Nordson Corporation
All rights reserved
106 966C
Issued 6/03
Manual 12-27
See Figure 6-12.
1. Reinstall the two O-rings (8) in the air and fluid ports on the
body-to-manifold mating surface of the film coater.
2. Place the film coater over the locating pins on the manifold (9).
3. Secure the film coater to the manifold with the plate (2) and
screws (1).
1227013B
1
2
3
5
6
4
9
7
8
10
Fig. 6-12
Installing the film coater on the manifold
1. Screw
2. Plate
3. Rotating ring half
4. Screws
5. Extension
6. Shoulder screw
7. Rotating ring half
8. O-rings
9. Manifold
10. Mounting screw
Replacing the Film Coater on
the Manifold
Summary of Contents for Select Coat SC-204HS
