Operation
4‐6
Part 7192568-03
E
2020 Nordson Corporation
4. See Figure 4‐4. A countdown will start on the screen once the powder
inside the hopper clears the low level probe. When the countdown is
finished press the
OK
button to move to the next step.
Powder Load Countdown Screen
5. The screen in
Figure 4-6 directs the operator to connect the hoses to the
extract position and bring the exhaust pipe of the hopper into the cleaning
position by turning it 180
_
.
Hose Connections and Positioning
6. After connections and positioning are complete, press the
OK
button to
begin the cleaning of the hopper.
7. When the cleaning is complete, the operator will be asked to press the
OK
button again to advance to the next step.
