Tribomatic Magnum Automatic Powder Spray Gun
10
E
2000 Nordson Corporation
All rights reserved
343 547A
Issued 8/00
Manual 37-37
WARNING:
Allow only qualified personnel to perform the
following tasks. Follow the safety instructions in this document
and all other related documentation.
WARNING:
Use appropriate respiratory protection. Breathing
certain airborne dusts (including finishing powders) may be
hazardous to your health. For specific guidance, ask the
powder manufacturer for a Material Safety Data Sheet (MSDS).
WARNING:
Make sure the gun is grounded before spraying
powder or cleaning the gun with compressed air. Without a
ground connection the gun will become electrostatically
charged. Personnel touching the gun could receive a shock.
WARNING:
All electrically conductive equipment in the spray
area must be grounded. Ungrounded or poorly grounded
equipment can store an electrostatic charge which can give
personnel a severe shock or arc and cause a fire or explosion.
WARNING:
This equipment can be dangerous unless it is used
in accordance with the rules laid down in this manual.
Each automatic gun is controlled by one gun control unit which houses
electrical controls, a digital display, and regulators and gauges for
flow-rate and diffuser air. Refer to the manual shipped with the Magnum
control unit for operation instructions.
4. Operation
