5.4 Scanning 135-type film
5 ñ 11
5.
M
as
ter
ing
ba
sic
o
pera
tio
ns
ï For details about image correction, frame feed, frame number or setting the scanning type, see
3.1 Configuring image correction settings [Environment: Correction tab],
frame advance and frame number [Operator Selections: Environment tab] in the Operator's Manual
*1. Displayed only when the EZ Controller or printer is used, and Print Type is Normal Print.
*2. For details about how to use the Operator's Manual, see
7.1 Accessing the HELP display.
Resolution
Select the resolution for the film to scan by clicking
.
The source size and the image size at the selected resolution are shown.
ï LOW:
Select this if making 89 mm
×
127 mm prints using a 300 dpi printer, for
example.
ï MID:
Select this if making 127 mm
×
178 mm prints using a 300 dpi printer, for
example.
ï HIGH:
Select this if making 305 mm
×
457 mm prints using a 300 dpi printer, for
example.
ï Automatic (High Quality):
Scanning is performed with the magnification rate for the biggest print size
among C, P and H.
For example, if there are three print sizes,
C : 89
×
127
,
P : 89
×
254
and
H :
89
×
152
, the magnification rate for P size that is biggest among them is to be
selected.
With
Automatic (High Quality)
, the quality is given priority in scanning.
This takes more time for processing than
Automatic (High Speed)
.
N
OTE
ï The print quality and processing capacity depend on which print sizes are
used. For example, when the print sizes included in a scanned film are
the same, there is no difference in the quality and the processing capacity
regardless of your choice.
ï Automatic (High Speed):
Scanning is performed with the magnification rate for the smallest print size
among C, P and H.
For example, if there are three print sizes,
C : 89
×
127
,
P : 89
×
254
and
H :
89
×
152
, the magnification rate for C size that is smallest among them is to
be selected.
Automatic (High Speed)
gives priority to capability than
Automatic (High
Quality)
for scanning.
N
OTE
ï The print quality and processing capacity depend on which print sizes are
used. For example, when the print sizes included in a scanned film are
the same, there is no difference in the quality and the processing capacity
regardless of your choice.
The resolution name that is shown onscreen can be changed on the
Environment
display.
ï For details, see
2.2 Specifying names of displayed unit and resolution
[Environment:Others tab] in the Operator's Manual
.
Check the frame stop
position for all frames.
Select whether to confirm the stop position of all frames.
If confirming the stop position of all frames while scanning, select the check box.
Item
Explanation
Summary of Contents for LS-600
