Noritz RC-9018M, User Manual

15

(Display when recirculation is set to OFF)

                Manually  Stopping 

Recirculation Operation

For “System [ Rcrc ]”

Recirculation operation can be manually stopped or 

started using this procedure.

3.  Press the 

ENTER

 button.

5.  Press the 

ENTER

 button.

4.  Select “Recirc on/off” using the   /   buttons.

2.  Press the 

MENU

 button inside the cover, select 

“Recirc menu” using the   /   buttons.

Operation

•  Display “Starting recirc operation” when the 

recirculation is set to ON.

•  If the display is left untouched for 

approximately 20 seconds without pressing 

the 

ENTER

 button, the setting will be 

completed. The home screen will be restored.

The screen returns to the previous screen.

Manually Stopping Recirculation Operation

NOTE

Even if recirculation is set to OFF, 

recirculation operation is restarted 

by either turning the 

Power

 button 

ON, when the Water Heater is 

turned ON automatically (see page 

7) or when the recirculation timer 

(see page 16) is active.

(e.g. 110°F)

1.   The 

Power 

button is ON.

•  The Power indicator is displayed.

•  The previously set hot water supply 

temperature is shown.

SHB8126(1)取説RC-9018M.indd   15

2019/08/30   16:41:52