3
Display Screen
• The display screen shown below is for illustration purposes only.
The actual display will vary depending on how the Water Heater is being used.
• After a button is pressed, the display will gradually become darker to prevent unnecessary power
consumption by the Remote Controller.
(Home Screen Example)
General Parts
8
4
2, 3
1. Flame Indicator
The flame indicator is displayed during combustion
when using hot water or recirculation functions.
2. Display for Temperature Setting
During normal operation, “Temp” is displayed.
3. Display for High Temperature “Hi temp”
Displays when the set temperature is 125°F / 55°C
or higher. (See page 6)
4. Temperature Setting
(e.g. 110°F)
5. Clock Display
(e.g. 10:15 am)
Normally the clock display is not shown when the
Power button is OFF.
* This setting can be changed so that the clock is
displayed even when the Power button is turned
OFF. (See page 10)
6. Error Code
A number will flash if a failure occurs.
7. Locked Display
The lock symbol is displayed when the Remote
Controller is locked. (See page 9)
8. Recirculation Timer
The clock symbol is displayed when the
recirculation timer is activated. (See page 16)
9. Display for Recirculation Operation
• For systems that use recirculation operation, the
symbol is displayed when the Power button is
turned ON.
• It is displayed during the recirculation operation.
(See page 5)
1
7
5, 6
9
NOTE
As shipped from the factory, the
Remote Controller is set to display in
°F and gallons.
To adjust the display to °C and liters,
refer to the Installation Manual.
What is the home screen?
The home screen is displayed when the Power button is ON.
Normally, the hot water temperature and the clock, etc. are displayed.
SHB8126(1)取説RC-9018M.indd 3
2019/08/30 16:41:50
