7
This example describes setting the “ON time” and
“OFF time” to 10:00 am and 8:00 pm, respectively.
(Display Example)
Set the time to turn ON or OFF the
Power button automatically
• If you set the time to turn ON or OFF the
Power
button, the
Power
button is automatically turned
ON or OFF at the set time every day by just
turning the
PROG
button ON.
• It is also possible to set only ON or OFF operation.
• For recirculation systems, circulation is started
or stopped according to the
Power
button
condition, ON or OFF.
4. Press the
ENTER
button.
6. Press the
ENTER
button to complete the setting.
8. Press the
ENTER
button to complete the setting.
9. Check “Set” is selected, and then press the
ENTER
button to confirm all settings.
The
PROG
button is ON.
5. Set the ON time to “AM 10:00” using the /
buttons.
7. Set the OFF time to “PM 8:00” using the /
buttons.
1. Check that the current time is properly set.
(Setting the time : See page 4)
2. Check the
PROG
button is set to OFF.
3. Press the
MENU
button inside the cover, Select
“Set PROG” using the / buttons.
Operation
• The previously set “Start time”and “End time”
are displayed.
• This adjustment can be made whether the
Power
button is ON/OFF.
• The time changes in 10 minutes increments
with each press of the button, and then in 1
hour increments if the button is pressed and
held.
• If you do not want to set the “Start time”,
select “- : --” (located between AM 11:50 and
PM 0:00 settings).
• Follow the same procedure from step 5.
• If the display is left untouched for
approximately 20 seconds without pressing
the
ENTER
button, the setting will be
completed. When the
Power
button is turned
ON, the home screen will be restored.
• If you want to change “ON/OFF time”, select
“Reset” and then press the
ENTER
button,
return to step 5.
• You can activate automatic operation
regardless if the
Power
button is ON or OFF.
• The PROG indicator is displayed when
activated.
• “Start time” and “End time” will be displayed
upon activation.
• If both the “Start time” and “End time” are set
to “- : --”, the alarm sounds and “Set PROG” will
display.
Automatic Water Heater ON or OFF Operation
Activate Automatic Operation
Automatic Water Heater ON or OFF Operation
SHB8126(1)取説RC-9018M.indd 7
2019/08/30 16:41:51
