CP6, CP7, or CP8: Series Programmable Controller
Version 1.0
Page 4
Real time clock settings, night/day settings, dual channel light settings(optional)
Allows you to set the controlling set points
Allows you to set the main working parameters (startup delays, redundancy, defrost settings, door
heater adjustments, etc.)
This screen gives product version number and information to the user.
Aux 1 allows you to enter digital input setup
Aux 2 allows you to enter control offsets for sensors (analog)
P
LASTIC
B
UTTON FUNCTIONS
1.
On/Off:
turns the system on and off. This will include the room lights, outlets, refrigeration, heating, and
humidity control. The green LED lit behind the button indicates that the unit is ON.
WARNING:
DISCONNECT ALL SYSTEM POWER BEFORE SERVICING ANY EQUIPMENT!
2.
Alarm:
by pressing this button you can display the active alarms, reset them manually or silence the
buzzer. When the red LED indicator lights up, at least one alarm condition has occurred.
3.
Up arrow:
moves upward through the program windows and increases the values of the control parameter
when the cursor is in a parameter field (no backlight).
4.
Down arrow
: moves downward through the program windows and decreases the values of the control
parameter when the cursor is in a parameter field (no backlight).
5.
Enter
: moves the cursor between parameter fields and confirms the set data. The button is backlit
(yellow light) and indicates that the unit is being powered.
