Montagehinweise / Mounting information / Consigne de montage / Montagetip
2021-10-05 / 8214 346 / B
7 von 16
|
NORMBAU
Intended use
NORMBAU products are designed for use in wet rooms, at home, in care facilities
and hospitals. They offer support to people with and without physical limitations. Use
by children is not permitted.
Articles that are no longer required must be disposed of in the prescribed manner.
Listed articles are made of recyclable polyamide and metal components.
Maintenance
NORMBAU products are not maintenance-free! The products are to be tested
monthly by qualified specialists for proper function. In the event of defects (e.g.
insufficient braking force), the assembly instructions must be observed.
Attention
There is no toxic hazard from the material used by NORMBAU. Tested according
DIN EN ISO 10993-5:2009. Sun exposure or cleaning with hot water can reach
temperatures higher than 41°C, which can lead to skin damage / burns.
Caution, risk of injury
When folding the support arm upwards, do not put your hand between the wall and
the handle. When folding the handle down, do not hand between the buffer and the
wall plate!
Disclaimer of liability
NORMBAU assumes no liability for personal injury or property damage that arises or
has arisen as a result of improper assembly, use or cleaning, in particular in
disregard of the warning and safety instructions listed in these instructions.
According to the current regulation, the warranty is two years.
Under the intended conditions of use and in compliance with the guidelines for
maintenance and cleaning, the intended lifespan of the article is five years.
If you would like more information about the products, visit us at www.normbau-
extranet.de or contact us via customer s49 (0) 7843 704 0.
For an enlarged view, you can find these assembly instructions by entering the
article number on the homepage.
