ATOM 100-250W BUC & SSPA
Revision 2.2
908236
15
908236_r2.2 - Operator Manual ATOM KU
100-250W.doc
Section 2.4
J2
–
M
ONITOR AND
C
ONTROL
I
NTERFACE
The M&C interface is used to control the unit with a host computer. All on-board sensors are accessed
through this interface. Use of this connection is optional. Each ATOM is supplied with a mating
connector for the M&C interface.
The standard M&C configuration includes RS-485 addressing capability. The 100-250W ATOM can be
ordered with web interface or RS-232 serial interface options.
Table 2-3
summarizes the M&C interface
protocols available with each option.
Table 2-3: M&C Interface Options
Orderable Option
Communication Interfaces
RS-485 Addressable
RS-485
RS-232
Web Interface
Standard
X
X
RS-232 Option
X
Web Interface Option
X
X
M
ONITOR AND
C
ONTROL
I
NTERFACE
P
INOUT
The M&C interface is a ten pin miniature circular connector. This connector is a MIL-C-26482 Series 1
receptacle, shell size 12, 10 pin (Amphenol® part number 71-570123-10P). A mating connector is
Amphenol® part number PT06E-12-10S-SR. A range of compatible part numbers for the mating
connector may be used to add options to the plug such as right-angle, stress relief clamp, metal
color/finish, etc. Please contact the connector manufacturer for more information and/or refer to
Amphenol® catalog 12-070.
Figure 2-9: J2 M&C Connector Pin Arrangement