USINGYOURHEATER
OvernightBurns
Largeunsplitlogsarethebestfueltouse.
Make sure you have a good strong bed of
glowing coals and the heater is hot before
loadingthelogs.
Placealoadofwoodonthestrongbasefire
andcoals,shutthedoorandleaveonhighfor
about30minutesoruntilthelogsarecharred
allover.
Turndowntolow.
Restarting After an Overnight
Burn
Adjustaircontroltohigh.
Rakethehotcoals.
Place some kindling and small logs on the
coals.
Oncethefireisestablished,startputtingon
largerlogs.
RemovingAshes
When the ashes are level with the firebox
opening,it stimeforacleanout.Thisshould
’
onlybedonewhenthefireboxhascompletely
cooled.Removinghotashesishazardous.
Push chunks of charred wood to one side.
Thesewillburninthenextfire,soitwouldbea
shametowastethem.Usingametalscoop,
remove excess ash and place in a metal
container.
Youshouldleaveasmallamountofashinthe
fireboxtoprovideaninsulatingbaseforthe
nextfire.Rakethemoversotheyformaflat
bed.
Whendisposingoftheashes,keepthemina
metal or other non-combustible container
with a tight fitting lid. Move them outdoors
immediatelytoanareaclearofcombustible
materials. Do not place them in plastic
receptacles.
9
HeaterFans
All Norseman Silhouette heaters are fitted
withauniqueelectroniccontrolthatensures
yourheateralwaysburnsefficientlyandwith
theminimumemissionsbeingemitted.
As such, if the fan is on and you open the
heaterdoor,thefanwillautomaticallyturnoff
and automatically restart approximately 20
minutesafterthedoorisclosed.
Also, if the fan is on and the air control is
turnedtolow,thefanwillnotoperate.If,or
when,theaircontrolisopenedfromthelow
setting, the fan will automatically restart
approximately20minutesaftertheaircontrol
ismovedfromthelowposition.
There is an LED indicator next to the fan
switch.Itwilleitherflashorbeon(i.e.solid
and non-flashing) depending on the
operationofthefan.
The LED will be on whenever the fan is in
operation.
The LED will flash when the fan is not in
operation,suchaswhenthedoorisopen,or
theaircontrolisturnedtolow,orduringthe
20minutedelayperiod.
