Nor265 User Guide
Norsonic AS
21
7 Modifying the user interface
The user interface may be modified by remote commands if
N o r 2 6 5
is equipped with the option for remote operation. This means that
position 1 to 8 of the rotational switch may be programmed to any of
the normal states of operation:
stop movement
go to a specified angle position
go relative from current position
rotate continuously with specified speed and direction
sweep between two specified sweep limits
As an example, if you program switch position 1 to "stop" and
position 2 to "go relative 10° ", the boom will step 10° counter-
clockwise each time the switch is moved from position 1 to 2 . The
current value while programming will be used for the speed and
acceleration time.
Note that you are not allowed to redefine the action for switch
positions 0
Remote
and 9
Go home.
The programming of the user interface is most easily done from
Program
Nor1029
. See figure below for the screen copy.
Summary of Contents for Nor265
Page 1: ...Im265_1Ed1R2En December 2004 ...
Page 4: ......
Page 30: ......
Page 32: ...Nor265 User Guide 32 P O Box 24 N Lierskogen Norway www norsonic com ...