background image

156

 / Moving line buttons

Modular ICS 7.0 System Coordinator Guide

N0000626  03

The 7316 starts lines at button 01, which is the fourth 
button down, on the left side of the lower button set. 
The 7316E starts line numbering at button 09, which is the 
left top corner of the lower button set. Refer to the default 
charts for specific button placement for the telephones.

Moving line buttons

You can move external lines, hunt group appearances, and 
target line appearances to different buttons on your telephone, 
to arrange your lines in the way that makes the most sense to 
you. If you have an eCAP, you cannot move intercom or 
Answer DN assignments onto the module, but you can move 
your lines and Hunt group appearances over to the modules. If 
you have a 7316E+eKIM eCAP, you can move lines, target 
line appearances, and hunt group appearances over to the 
KIM.

Note: The 7000 and 7100 digital phones and Digital Mobility 
phones do not have buttons with indicators, therefore this 
feature is not valid for those telephones.

1. Press 

≤•°⁄

2. Press the button you want to move the line from.

3. Press the button you want to move the line to.

Displays

The two buttons you selected have 
exchanged position.

You have tried to move a line to a button that 
cannot be used as a line button, such as an 
intercom button, handsfree/mute button, or 
an answer button.

Exchanged

Invalid location

Summary of Contents for 7316







































































































































































































































































































Reviews: