66 Using Not-star features
One button access
You can program most
feature codes onto telephone
memory buttons so that you can use the feature by pressing a
single button, See the procedures in the Feature programming
section.
Whenever the instructions tell you to enter a‘feature code, you
can do so either by pressing the buttons shown in the feature
description or by pressing a memory button on ‘which the feature
code has been programmed. You can also enter a telephone
number by pressing an
button, rather than entering it
manually.
Canceling
a feature
Some features change the way your telephone works. To make
your telephone work normally again you must cancel the feature.
To cancel a feature, press
then I# and the feature
code. For example, to cancel Call Forward, which you activate by
pressing
(4, press
If a feature code is programmed onto a memory button, you may
be able to cancel the feature by pressing the memory button
while the feature is active.
If you change your mind in the middle of using a feature, you
back out by pressing (Feature] or
Be aware that pressing
disconnects any active or held call.
Telephone
Because the M7100 Telephone does not have any line buttons it
sometimes works slightly differently from other
. telephones. Where other telephones may require you to select a
line button to answer a call, on the M7100 Telephone you simply
pick up the receiver. Where other telephones require you to
select a fine button to take a call off hold, you press
on
the
Telephone. The
Telephone cannot have a
button. You will find special instructions for the M7100
Telephone in some feature descriptions.
Compact
System Coordinator Guide
Summary of Contents for Compact 616 DR5
