Customizing your telephone’/ 109
Press the button of the line you want
to move. Press
QUIT
or
when you have finished moving lines.
Press the button you
to move the
line to. Neither of the buttons is
erased. The lines, or the line and
,
feature, simply switch places,
The button you are trying to move is
not a line button. If you are trying to
switch a line and a feature, move the
line to the feature button and not vice
versa.
Pulse/Tone Dialing
Each external line is set to either pulse or tone dialing. Pulse
dialing is the traditional method of dialing used by rotary diaf or
push button single-line telephones. Tone dialing allows
telephones to communicate with other devices such as
answering machines. Tone dialing is required to access the
features that PBX systems may offer.
Your Customer Service Representative sets your lines to pulse or
tone dialing in Configuration programming.
To switch from pulse to tone dialing
If your external lines are programmed for pulse dialing, you can
switch your telephone temporarily to tone dialing.
1. Press while on an active line. Once you hang up, your
telephone returns to pulse dialing.
Ring Type
You can choose one of four distinctive rings for your telephone.
This makes it easier to identify your telephone in an open office.
1. Press
2. Choose the ring type you want.
Compact
System Coordinator Guide
Summary of Contents for Compact 616 DR5
