‘age 12
Individual
Change the Directory Number (DN) of a telephone. All
must be the same length. The first
digit of a new DN cannot be the same as the External Line access code or 0.
Note: Changing an individual DN locks the configuration session into System Data mode, and
when the session ends, you have to m-enter the Configuration access code and the
Installer password to continue with programming.
Installer password
Change the one to six character Installer password used to enter Configuration programming
from the default of
(266344).
Intercom buttons
Choose the number of intercom buttons on the telephone (default is 2) for access to internal
lines.
Line abilities
A section of programming that lets you apply dialing filters to lines.
Line Access
A sub-heading for a programming section that lets you program settings for each telephone.
Line assignment
Enter the line numbers of the lines to be assigned to the telephone (default assignments are lines
01 and 02).
Each line assigned to a telephone must appear at a button with an indicator on the telephone,
(except for the M7100 Telephone which has no line buttons and can be assigned any number of
lines).
Line data
A section of programming that lets you program settings.
Line fltr
Enter a two-digit filter number to temporarily replace the Line filter assigned to this line.
The default
allows a filter programmed previously to continue to apply.
Line filter
Retain default filter 03 defined previously in Dialing filters programming or assign another
digit filter number to the line.
Line names
Identify a line by the name of its destination or by the trunk type (up to seven characters).
Line
access
Choose the Line Pools (A to to which the telephone user will have access.
The default is No for all pools.
Line
codes
Assign the Line Pool access codes for each Line Pool used. A code can be one td four digits in
length
(Line
Pool access codes have no defaults). A line pool code cannot start with the first digit
of any DN (including Rec’d
the call park prefix or the Direct-dial digit.
Line type
Lets you program settings for physical trunks.
Choose Public to be able to assign the line to any telephone.
Choose Private
to make the line private. Enter the DN of the telephone to which the line is to
be assigned.
Choose Pool to select Line Pool (A to C) to which the line will belong.
Note: See the Configuration chapter in the
Installer Guide for specific guidelines on
setting up line pools.
Line/set filters
Enter the three-digit number of a line assigned to the telephone. Assign a two-digit filter from
Dialing filters to replace any line or set filters that might otherwise apply to that particular line. You
can assign up to 255 Line/set filters.
Link time
Link time specifies the duration of a signal required to access a feature through a remote system.
The
is 600 milliseconds.
Log Defaults
A sub-heading for a programming section that lets you re-allocate system call log space for all
telephones.
Log password
Set the call log password for a telephone to default, erasing any user inserted password. The
default is No Password.
Log
space
Reallocate the call log space on a telephone-by-telephone basis.
Logging set
Identify the telephone(s) that will automatically receive call log information for a specific line
(providing you have subscribed to Call Display services).
Miscellaneous
A sub-heading for a programming section that lets you program various system-wide settings.
Name
This option only appears if Display
digits for Speed Dial is set to No. Enter
up to 16 characters to
see a name (such
as: COURIER)
instead of a telephone number on the display.
Namel,
Name3
Retain the default Service Mode names or enter new names (up to 7 characters).
Names
A sub-heading for a programming section that lets you assign meaningful names to telephones
and lines.
Summary of Contents for Compact 616 DR5
