Programming
If new telephones are being installed at the same time that
other telephones are being relocated; you should perform
the following procedure to ensure that Set Relocation occurs:
Select Yes to
ON Set Relocation.
2. Unplug the telephone that is to be relocated.
3. Plug the telephone into its new location.
4. Plug a new telephone into the old
of the
telephone that was moved.
Host delay
Host delay programs the delay in milliseconds between the
selection of an outgoing line and the moment that
sends
dialed digits or codes on that line, The default is
1000 milliseconds.
External code
Assign a one-digit External line access code, or none. The
default is 9. The External code allows an M7100 Telephone or
an
to access external lines.
Line pool codes
Assign Line Pool Access codes for each of the three possible
Line Pools. The possible settings are a one to four digit number
(starting with
8, or 9) or None. The default setting is None.
The codes cannot start with the same first digit of an internal
number already assigned to a telephone.
Codes starting with the same number must be the same
length.
Ensure that the System Coordinator knows the codes.
Compact
Installer Guide
Summary of Contents for Compact 616 DR5
