184 System features
You can clear a hung line only at the telephone that was used to
r e d i r e c t t h e l i n e .
1 .
Press
at the telephone that was used to
r e d i r e c t t h e l i n e .
2.
Press the button of the redirected line.
3 .
Press
or
4.
Press
or
q
. The hung line is cleared.
Clearing the redirected line clears the outgoing line for the
redirection as well.
Line Pools
A line pool allows each telephone access to external lines from a
group (or “pool”) of external lines. You can access such lines by
pressing an Intercom button and entering a line pool access code
or by pressing a memory button programmed with the line pool
feature code.
Private lines
A Private line is exclusive to a particular telephone. Calls that are
put on hold or left unanswered on a Private line cannot be picked
up at any telephone except the Prime telephone.
Prime line
Your telephone can be programmed to select an internal or
e x t e r n a l l i n e o r a l i n e p o o l a u t o m a t i c a l l y w h e n e v e r y o u l i f t t h e
receiver or press
This is your Prime line.
Ringing Line Preference
Each telephone in the
system can be programmed to ring
or remain silent for incoming calls on any external lines that
appear on the
1
Modular
System Coordinator Guide
P O 6 4 2 6 4 7 0 2
,
1
System features
For example, a telephone may have buttons assigned for lines
to 3, but have only lines 1 and 2 programmed to ring. An
incoming call on any of the three lines causes a line button
to flash, and the telephone can be
to answer the
call. This is especially useful for people who monitor other
lines, but want only their own lines to actually ring.
If a telephone has an external line as a Prime line, that line is
u s u a l l y m a d e t o r i n g .
Target line
I
A
target line is used to route a call dialed with a particular number
to a particular telephone or group of telephones. A target line can
be used for incoming calls only. A single trunk may provide
connections to several different target lines. This allows each
person or department in the office to have their own number
without having as many trunks on the system as there are
i n t h e o f f i c e .
Overflow Call Routing
If a call comes in for a target line that is busy,
routes the
Call to the Prime telephone for that target
If there is no Prime
t e l e p h o n e
t o t h e t a r g e t l i n e o r i f a c a l l c a n n o t b e
d i r e c t e d t o a t a r g e t l i n e , t h e c a l l w i l l g o t o t h e P r i m e t e l e p h o n e f o r
the incoming trunk.
System Speed Dial
Speed Dial codes 01 to 70 are the same for the entire system.
See the Speed Dial section for details.
P O 6 4 2 6 4 7 0 2
Modular DR5.1 System Coordinator Guide
