Registering individual portables / 73
P0941568 01
Modular ICS 5.0 Companion Installer Guide
2. Make a call.
a. Press
i
. You hear dial tone, and the display shows
LINK
. If you do not hear dial tone, check that you have
selected the correct system and that the associated desk
telephone is idle or register the portable again.
b. Dial the number of a working telephone. The telephone
must ring to confirm the registration.
3. Receive a call.
a. If the portable has the same extension number as a desk
telephone, make sure the desk telephone is idle and Call
Forward is not active.
b. On another working telephone, dial the telephone
number of the registered portable. The portable must
ring to confirm the registration.
If you do not hear dial tone, or if the portable does not ring,
refer to Troubleshooting. If you continue to experience
difficulty registering the portable, contact your distributor.
Deregistering the C3060
You can deregister the C3060 two ways:
•
from the portable
•
from the Administration Terminal
If you are in radio range of the system deregistering the C3060
from the portable clears registration information stored in the
portable and the system. For example, you may want to
deregister the portable before you assign it to another DN on
the same system.
Deregistering the C3060 from the Administration Terminal
does not clear registration data from the portable. Use this
method if the portable were lost or stolen or if you want to
assign it to another system.
