34 Norstar format
SMDR6 System Coordinator Guide
P0907246 Issue 01
An example of an Incoming Call in Standard format appears below.
Norstar Call Information record format
When this option is selected, CLID Information received from the KSU
for an incoming call prints between the record header and the event
lines. There is one occurrence of CLID Information per call. If no CLID
information is received, no CLID field appears in the record.
If you need CLID information in slave SMDR6, the master SMDR6 must
be configured to receive CLID information. The master SMDR6 must be
configured to print SL-1 CLID record format or Norstar CLID record
format (or Norstar real time format or Norstar all format).
Note
: SMDR6 reports CLID information only for lines which are capable
of delivering CLID. The Norstar KSU must be properly configured to
enable delivering CLID Information.
Call Information record field definitions
The first Call Information line after the header line is the CALLING
NUMBER:
•
maximum of 11 characters
•
if the number is truncated, the 11 digits received are preceded by “/”
•
if only partial CLID number was received, the digits are followed by
an “x”
•
UNKNOWN (if no data is received in the number field)
The second Call Information line is the NAME:
•
Name (maximum 15 characters)
•
UNKNOWN (if no name is received in the name field)
-------- 04/04/98 12:00:01 LINE = 0083 STN = 7726
00:00:00 INCOMING CALL RINGING 0:32
00:00:39 HOLD
00:01:12 UNHOLD
00:02:47 CALL RELEASED
