Norstar Voice Mail 4.0 Set Up And Operation Manual Download | Manualshive

Page: 13 / 258

background image

xi

P0886600 Issue 1.0

Set Up and Operation Guide

Confidentiality

The program and related documentation are copyrighted. Although copyrighted,
they are unpublished and contain proprietary and confidential information of
Northern Telecom and Northern Telecom's Licensors and are considered by them
to be trade secrets. You agree to hold the Program and documentation in
confidence. Without limiting the foregoing, you agree to protect the Program and
documentation at least to the same extent that you protect your own similar
confidential information and to take all reasonable precautions to safeguard the
confidentiality of them. You further agree not to use the Program or documentation
to develop competitive systems or derivative products, or for any purpose other than
the operation of the Northern Telecom Hardware.

General

If you acquired the Northern Telecom Hardware in the United States, this Sub-
License is governed by the laws of the State of New York. If you acquired the
Northern Telecom Hardware in Canada, this Sub-License is governed by the laws
of the Province of Ontario. Otherwise, this Sub-License is governed by the laws of
the country in which you acquired the Northern Telecom Hardware.

This Agreement is the entire agreement between us and supersedes any other
communications or advertising with respect to the Program.

If any provision of this Agreement is held invalid, the remainder of the Agreement
shall continue in full force and effect.

You agree to comply with all export and re-export restrictions or regulations of the
Department of Commerce or other United States agency or authority, and not to
transfer, or authorize the transfer, of the Program in contravention of such
restrictions or regulations.

Northern Telecom's licensors are direct and intended beneficiaries of this Sub-
License Agreement and may enforce it directly against you.

Upon termination of this Sub-License, you shall return all copies of the Program
and documentation to Northern Telecom or the person from whom you acquired
them.

You acknowledge that you have read this agreement, understand it and agree to be
bound by its terms and conditions.

«
...
11
12
13
14
15
...
»

Summary of Contents for Voice Mail 4.0



































































































































































































































































Reviews:

No comments

Related manuals for Voice Mail 4.0

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands