manualshive.com logo in svg

Norstar Voice Mail 4.0, Set Up And Operation Manual

The Norstar Voice Mail 4.0 is a comprehensive communications solution for businesses. With its extensive features and user-friendly interface, this manual provides step-by-step instructions for easy set up and operation. Download the Set Up And Operation Manual for free from 88.208.23.73:8080 and maximize the potential of this innovative product.

Share
Download
background image

206

  Appendix A: Dialing Translation

Set Up and Operation Guide

P0886600 Issue 1.0

Creating a DOS system disk

A DOS system disk is a floppy disk that has system files copied onto it. This type 
of disk is required to automatically load the dialing translation table file onto the 
Norstar Voice Mail system.

To create a DOS system disk:

1. Insert a blank 3.5" disk into the floppy disk drive of a DOS compatible 

computer.

2. Ensure the DOS prompt is on the computer screen.

3. Type  

Format a: /s

  and follow the instructions shown on the screen.

Note: The default name for the floppy disk drive is a:. However, on computers 

with two disk drives, the 3.5" drive may be named b:. If the drive is named 
b:, replace a: with b: in the above command. If you are unsure of the name 
of the 3.5" floppy disk drive, check the user manuals for your computer.

Creating an Autoexec.bat file

The Autoexec.bat file is a file that contains commands a computer automatically 
executes when it starts up. In the following steps you are creating an Autoexec.bat 
file that automatically loads the Dialing Translation Table file into the proper 
location on the Norstar Voice Mail system.

To create the Autoexec.bat file:

1. Open the text editor program you used to create the Dialing Translation Table 

file.

2. Create a new document.

Note: Type  

copy a:\dial.30 c:\st\dial.30

 .

Note: This is the only text that should appear in the file.

3. Save the file as autoexec.bat .

Note: The file must be named exactly as shown above. Do not save this file 

into the root directory (C:\) of your computer or you will destroy the 
existing Autoexec.bat file.

Summary of Contents for Voice Mail 4.0



































































































































































































































































Reviews:

No comments

Related manuals for Voice Mail 4.0

Panasonic KX-TVS75 User Manual preview
KX-TVS75
Brand: Panasonic Pages: 84
Sprint Digital Voice DVP 203 Quick Start Manual preview
Digital Voice DVP 203
Brand: Sprint Pages: 22

Brands by name

Popular brands

Load more brands