manualshive.com logo in svg

Norstar Voice Mail 4.0, Set Up And Operation Manual

The Norstar Voice Mail 4.0 is a comprehensive communications solution for businesses. With its extensive features and user-friendly interface, this manual provides step-by-step instructions for easy set up and operation. Download the Set Up And Operation Manual for free from 88.208.23.73:8080 and maximize the potential of this innovative product.

Share
Download
background image

66

  Special Mailboxes: General Delivery and System Coordinator

Set Up and Operation Guide

P0886600 Issue 1.0

After the Primary and Alternate Greetings are recorded, you must select a greeting 
to play. If you do not select a greeting to play, the Primary Greeting plays 
automatically.

Selecting a Mailbox Greeting

For a Primary or Alternate Greeting to play, you must select a greeting. If you do 
not choose a greeting, the Primary Greeting plays automatically. If you choose the 
Alternate Greeting, remember to change back to the Primary Greeting at the 
appropriate time.

If you select a greeting that is not yet recorded, you are transfered back to the 
Greeting option display to record the greeting.

To choose a Primary or Alternate Greeting:

10. For each Special Mailbox Greeting, follow 

steps 1 through 9
or
press 

® to end this programing session.

1. Press  

ƒ

 

·

 

°

 

⁄ .

2. Enter the System Coordinator Mailbox number 

and password, then press 

OK

 .

If the set you are using has a mailbox, the  

Pswd:

  prompt appears. Press  

OTHR

  to 

display the  

Log:

  prompt.

3. Press  

ADMIN

 .

4. Press  

GREET

 .

5. Press  

CHOOSE

 .

6. Select the greeting you want played.

Press 

® to end this programing session.

Log:
QUIT   RETRY   

0 new     0 saved
PLAY  REC  

Mailbox admin

      PSWD      

Greeting options
REC  

 CFWD

Use greeting:
PRIME  ALT   QUIT

Summary of Contents for Voice Mail 4.0



































































































































































































































































Reviews:

No comments

Related manuals for Voice Mail 4.0

Samsung SVMi-8E User Manual preview
SVMi-8E
Brand: Samsung Pages: 11

Brands by name

Popular brands

Load more brands