32
ML Solo - Direct room humidification
2591584_EN_1706
ML Systems
6
ML Solo - Direct room humidification
Figure 14: ML Solo direct room humidification system
6.1
General description
The Nortec ML Solo direct room humidification head is a subject-oriented high pressure adiabatic disper-
sion unit. It is part of a complete high pressure humidification system with one or more Solo units and
one or more high pressure pump stations.
Every ML Solo unit consists of 1 or 2 nozzles and a built-in fan. The nozzles are pointed in the direction
where humidity or evaporative cooling is desired, and the built-in fan allow for the mist to be dispersed
in a straight unidirectional trajectory.
The ML Solo is perfect for focused humidification needs; fruit and vegetable sections, printing works,
print shops, electronics fabrication or ESD suppression, labs, etc. The humidification unit is particularly
suitable for applications with low ceiling height. The unit has been developed with flexible and adjustable
joints that make it possible to adapt the humidification direction.
ML Solo features a low noise level and an output that corresponds to traditional compressed air nozzles.
In most places, ML Solo will be able to replace compressed air nozzles straight away.
Humidity is produced as water under high pressure (1015 psi (70 bar)) is atomized into micro-sized
particles which are instantly absorbed into the surrounding air.
The Solo units are typically attached to walls or columns via specific Nortec Solo brackets, and water is
fed via the high pressure tubing and electricity is fed via cables.
