Nortek Security & Control LLC
6
10. Trigger (FTEQ-12 Only).
12V trigger input turns the amplifier On or Off and
overrides the automatic signal detection circuit, reducing power consumption when
not in use. When this input receives a 12V signal, the subwoofer will turn ON. When the
signal goes away, the subwoofer will turn OFF.
11. Balanced IN (FTEQ-12 only).
Balanced connections allow the use of very long
cables while reducing electrical interference. Connect a balanced output cable from your
receiver or preamp to the subwoofers Balanced IN.
12. Balanced OUT (FTEQ-12 only).
These connect with Balanced type cables to
daisy-chain additional subwoofers or powered speakers. These outputs are pass-thru,
meaning they will pass through the same audio signal that is fed into the Balanced IN.
ON
OFF
STATUS
TRIGGER
BALANCE
IN
OUT
LOW LEVEL
OPTIONAL WIRELESS RECEIVER
POWER
100-120V~
220-240V~
FUSE T15AL/250V
100-120V~60Hz 12A
220-240V~50Hz 6A
USB POWER
5V
500mA
IN
OUT
L/LFE
R
FTEQ
➓
11
12
