background image

Copyright

©

 2019 Nortek Security and Control, LLC.

10021847 A

MM271

Mighty Mule

®

 is the retail brand of Nortek Security and Control, LLC.

This product meets the requirements of UL325, the standard for gate operator safety.

Installation Manual

Horizontal Support

Gate Swings Evenly and Freely

Hung Firmly and Plumb

Post Bracket

Control Box

Fence Post Set in Concrete

Run 1000' (max.) of low

voltage wire to control

box from transformer

(wire not included).           

Power Cable

Closed Position Stop Plate

PVC conduit (not included)

to protect wire from lawn

mowers and weed eaters.

Gate Bracket

Warning Sign

Single Gate Operator

 

120 Volt indoor

Transformer

(surge protector 

not supplied)

12 Volt automotive or marine 

type battery in weather proof 

housing (not included).  

Example of finished installation

(Installations vary slightly on different types of gates)

PRINTER’S INSTRUCTIONS:

INSTR,INSTL,MM271 - P/N: 10021847 

A - INK: BLACK - MA

TERIAL: 20 LB. MEAD BOND - SIZE: 8.500” X 1

1.000” - 

TOLERANCE: ± .125” - FOLDING: 

ALBUM FOLD - BINDING: SADDLE STITCH - SCALE: 1-1

Summary of Contents for Mighty Mule MM271




















Reviews: