background image

Single Package convertible air conditioner (3-PHaSe only)

Premium Model Shown

P8Se SerieS

14 Seer

inStallation inStructionS

iMPortant

attention inStallerS:

it is your responsibility to know this product better than your customer. this includes being able to install the product 

according to strict safety guidelines and instructing the customer on how to operate and maintain the equipment for 

the life of the product. Safety should always be the deciding factor when installing this product and using common 

sense plays an important role as well. Pay attention to all safety warnings and any other special notes highlighted 

in the manual. improper installation of the furnace or failure to follow safety warnings could result in serious injury, 

death, or property damage.
these instructions are primarily intended to assist qualified individuals experienced in the proper installation of this 

appliance. Some local codes require licensed installation/service personnel for this type of equipment. Please read all 

instructions carefully before starting the installation. return these instructions to the customer’s package for future 

reference.

do not deStroy. PleaSe read careFully & keeP in a SaFe Place For Future reFerence.

Summary of Contents for P8SD-X36C

















Reviews: