Reznor, PREEVA Neos, Installation Manual, EN 2021-05, D301315 Iss 1 Page No 7 of 52
G
Uncrating / preparation
Prior to crating and shipping, this unit was test
operated and inspected in the factory and left in
full operating condition. If the unit has incurred
damage in shipment, document the damage
with the transport company and contact your
supplier.
After unpacking the appliance leave it fastened
to the wooden blocks until just before siting to
prevent damage to the base frame.
When transporting the appliance after it has
been unpacked (i.e. fork lifting, etc.) note the
restrictions and recommendation indicated
in figure 1.The base frame contains internal
support members, which act as a lifting fulcrum
point to prevent damage to the underside of the
appliance by lifting forks.
Read this booklet and become familiar with the
installation requirements of your unit. If you
do not have knowledge of local requirements,
check with the gas supplier and any other
local agencies who might have requirements
concerning this installation. Before beginning,
make preparations for necessary supplies, tools,
and manpower.
Check if the local distribution conditions of
electricity supply, type of gas and pressure of the
appliance are compatible with the data plate.
The appliance must be installed in accordance
with the current rules in force and any local or
national regulations.
The requirements of the "Local Building
Standards office", the premises "Insurance"
undertaking and the "Fire Office" must also be
observed.
If the installation includes optional vertical
louvres or downturn nozzle etc., install these
options before the heater is suspended. Follow
the instructions included in the option package.
Minimum fork
length requirement
Minimum fork
work for balance
Figure 1 - Handling Criteria
Summary of Contents for PREEVA NEOS
Page 2: ......
Page 41: ...Reznor PREEVA Neos Installation Manual EN 2021 05 D301315 Iss 1 Page No 41 of 52 FF...
Page 50: ...Notes...
Page 51: ...Notes...
