Page
10
of
26
Copyright E-MetroTel ©2016
2828 W. Parker Rd. Unit B201, Plano, TX. USA. 75075
www.emetrotel.com
Using System Speed Dial
1.
Press the
Feature
soft key followed by the feature code
0
.
2.
Enter the Speed Dial Code.
2.2
While on a Call
Feature
Steps
On Hold
1.
To place an active call on hold, just press the
Hold
key.
2.
To retrieve the call previously put on-hold, press the
Line
key with the held
call.
3.
If a call is placed on hold for an extended period of time, a notification tone
will be played.
Transfer (Attended)
1.
Press the
Transfer
soft key and the original caller is placed on hold.
2.
Enter the other number you want to call and press the
Call
soft key or the
#
sign.
3.
When the other party answers, you can consult with the other party first.
4.
To connect the other party with the original caller press the
Transfer
soft
key.
5.
To abort the transfer, press the
Cancel
soft key or the
Release
key to return
to the original caller.
Transfer (Blind)
1.
Dial
##
and the system prompt will say "Transfer" and present dial tone.
2.
Enter the other number you want to transfer the call to.
3.
The call is immediately transferred.
Transfer to Voicemail Box
1.
Press the
Feature
soft key followed by the feature code
986
.
2.
Enter the mailbox number you want to transfer to.
Speed Dial Codes are configured by the UCx Administrator under
Phonebook.
The time interval for the notification tone is configurable and can also
be disabled by your UCx Administrator under Nortel Settings.
