90
System configuration management
Slot 0 - Radio G (802.11b/g) settings
Radio Mode—Selects the operating mode for the 802.11b/g wireless
interface. (Default: 802.11b+g)
•
802.11b+g: Both 802.11b and 802.11g clients can communicate with
the access point (up to 54 Mb/s).
•
802.11b only: Both 802.11b and 802.11g clients can communicate with
the access point, but 802.11g clients can only transfer data at 802.11b
standard rates (up to 11 Mb/s).
•
802.11g only: Only 802.11g clients can communicate with the access
point (up to 54 Mb/s).
Radio Channel—The radio channel that the access point uses to
communicate with wireless clients. When multiple access points are
deployed in the same area, set the channel on neighboring access points at
least five channels apart to avoid interference with each other. For example,
in the United States you can deploy up to three access points in the same
area (for example, channels 1, 6, 11). Also note that the channel for wireless
clients is automatically set to the same as that used by the access point
to which it is linked.
Auto Channel Select—Enables the access point to automatically select an
operating radio channel. (Default: Enabled)
Maximum Station Data Rate—The maximum data rate at which the access
point transmits unicast packets on the wireless interface. The maximum
transmission distance is affected by the data rate. The lower the data rate,
the longer the transmission distance. (Default: 54 Mb/s)
BAP120
Using the Nortel Business Access Point 120
NN47921-301
01.01
Standard
1.0
August 2006
Copyright © 2006, Nortel Networks
Nortel Networks Confidential
.
Summary of Contents for 120
Page 1: ...BAP120 Using the Nortel Business Access Point 120 NN47921 301 ...
Page 129: ......
