Setting up LAN Emulation
Basic Configuration and Setup
8-12
Centillion 1200N ATM Switch User Manual
NTP 297-8103-903
Adjust ILMI timing parameters. This is specific to a connection to an ATM-
NIC. Use the following values: Timer value = 5, Times of retry = 60 (default)
and Keepalive = 20.
8.
Before svcline can be turned on, you must:
SET signaling 00 0 5
SET signaling 03 0 5
9.
When connecting two switches together, one has to be set to Network side and
another set to User side. (In this example, 8550-LES is set to Network side;
therefore, 8550 must be set to User side.)
For PNNI interface port 00:
SET atmsig 00 0
Interface (network|0 user|1)? 1
T303 (1-255,default=4)? 4
T308 (1-511,default=30)? 30
T309 (1-511,default=90)? 90
T310 (1-255,default=10)? 10
T313 (1-255,default=4)? 4
T316 (1-511,default=120)? 120
T317 (1-255,default=60)? 60
T322 (1-255,default=4)? 4
T398 (1-255,default=4)? 4
T399 (1-511,default=14)? 4
UNI Version (UNI3.0|0 UNI3.1|1,default=3.0)? 3.0
10.
For UNI interface port 03:
SET atmsig 03 0
Interface (network|0 user|1)? 0
T303 (1-255,default=4)? 4
T308 (1-511,default=30)? 30
T309 (1-511,default=90)? 90
T310 (1-255,default=10)? 10
T313 (1-255,default=4)? 4
T316 (1-511,default=120)? 120
T317 (1-255,default=60)? 60
T322 (1-255,default=4)? 4
T398 (1-255,default=4)? 4
T399 (1-511,default=14)? 4
UNI Version (UNI3.0|0 UNI3.1|1,default=3.0)? 3.0
SET svcline 00 resume
SET svcline 03 resume
Re-set the signaling connection deleted
previously. A signaling connection is set
with VPI/VCI=0/5
Set UNI 3.0
