Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference
Redundant Firewalls
187
213455-L, October 2005
To synchronize two Switched Firewalls, perform the following steps:
1.
Configure the Sync interfaces (see
Step 9
on
page 131
).
2.
Test the Sync network (test initiated on example Host 2).
3.
From the Check Point SmartDashboard, update the firewall interface information.
See
page 136
.
4.
From the Check Point SmartDashboard, re-install the security policies on both Nortel
Switched Firewalls.
>> Main#
/maint/fw/sync
Cluster Mode: Sync only (OPSEC)
Number Unique Address Firewall State (*)
1 (local) 10.10.1.193 active
2 10.10.1.194 active
(*) FW-1 monitors only the sync operation and the security policy
Use OPSEC’s monitoring tool to get the cluster status
>> Firewall Maintenance#
