Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference
Layer 2 and Layer 3 Firewalls
199
213455-L, October 2005
6.
To configure the synchronization network, perform the following steps:
6a) From the Gateway Cluster Properties menu, select
3rd Party Configuration
.
The 3rd Party Configuration page appears. (see
Figure 101
).
6b) In the Specify Cluster operating mode area, select
High Availability
.
6c) From the 3rd Party Solution list, select
Other OPSEC
.
6d) Select
Use State Synchronization
.
6e) Consult the OPSEC documentation to determine settings for the OPSEC check boxes.
6f) Click
OK
.
Figure 101
Gateway Cluster Properties—3rd Party Configuration
7.
To configure topology for the cluster, select Topology from the Gateway Cluster
Properties menu.
The Gateway Cluster Properties—Topology page appears (see
Figure 102
).
7a) Select
Enable Extended Cluster Anti-Spoofing
.
