Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference
272
Command reference
213455-L, October 2005
about
This command displays the system information such as the hardware type, os-version,
Check Point version, firewall version, firewall policies configured on the system, SIC
state, licenses configured on the system, and the Check Point sync status.
alarms
This command lists the alarms generated in the system. The sensor module is responsible
for generating the alarm events when the fan rpm values reaches the critical level or
when the temperature reaches the maximum level.
dump
This command displays the current configuration information available in this menu.
capacity
This command displays the capacity of the software features, such as total number of
interfaces, total number of ports, maximum number of VLANs, static routes, hardware
type, memory usage etc.
Table 10
Information Menu (/info) (Continued)
Command Syntax and Usage
