Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference
306
Command reference
213455-L, October 2005
/cfg/sys/adm/snmp/system
SNMP System Information Menu
The SNMP System Information Menu is used to configure basic identification information
such as support contact name, system name, and system location.
add
<trap host IP address> <port number> <community string> <trap user>
This command lets you add an SNMP trap host. The trap host with the specified IP
address will receive any enabled SNMP messages from the Firewall. Event messages
and alarm messages can be independently enabled or disabled in the SNMP Administra-
tion Menu (see
page 302
). You will be prompted to enter port number, community string
and trap user information.
insert
<index number>
<IP address>
This command lets you add a new trap host IP address to the access list at the specified
index position. All existing items at the specified index number and higher are incre-
mented by one position.
move
<from index number>
<to index number>
This command removes the trap host IP address of the specified
from
index number and
inserts it at the specified
to
index number in the access list.
[SNMP System Information Menu]
contact - Set Contact
name - Set Name
loc - Set Location
Table 39
SNMP System Information Menu (/cfg/sys/adm/snmp/system)
Command Syntax and Usage
contact
<new string, maximum 64 characters>
Configures the name of the system contact. The contact can have a maximum of 64 char-
acters.
Table 38
Trap Hosts Menu Options (/cfg/sys/adm/snmp/hosts) (Continued)
Command Syntax and Usage
