Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference
342
Command reference
213455-L, October 2005
/cfg/net/ospf/aindex
<area index>
OSPF Area Index Menu
The OSPF Area Index Menu is used for defining OSPF area numbers and parameters.
For more information about OSPF, see
Chapter 4, Open Shortest Path First
.”
ena
This command globally turns on OSPF.
dis
This command globally turns off OSPF.
[OSPF Area Index 1 Menu]
id - Set area ID
type - Set area type
ena - Enable area
dis - Disable area
del - Remove OSPF Area Index
Table 65
OSPF Area Index Menu (/cfg/net/ospf/aindex)
Command Syntax and Usage
id
<area ID, such as 0.0.0.0>
This command sets the OSPF area number in dotted decimal notation. The area number
can be set using the last octet format (0.0.0.1 for area 1) or using multi-octet format
(1.1.1.1), though the same format should be used throughout an area.
type transit|stub
This command sets the area type:
transit for the backbone.
stub for any area that contains no external routes.
The default type is transit.
ena
This command enables this area.
Table 64
OSPF Menu (/cfg/net/ospf) (Continued)
Command Syntax and Usage
