Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference
396
Common tasks
213455-L, October 2005
Use the right arrow to toggle the settings and enable the USB port as shown in
Figure 128
.
Figure 128
Devices and I/O Ports—USB Setup
6.
Press <Esc> twice.
Pressing the escape key twice exits both the USB Setup Menu and the Configuration/Setup
Utility. The Exit Setup dialog box appears as shown in
Figure 129
.
Figure 129
Exit Setup dialog box
7.
Select
Yes, save and exit the Setup Utility
and Press <Enter>.
8.
The firewall reboots with USB support enabled in the BIOS.
