manualshive.com logo in svg

Nortel 5100 Series Release 2.3.3, User'S Manual And Command Reference

Get the Nortel 5100 Series Release 2.3.3 User's Manual and Command Reference manual for free download from our website. This comprehensive manual provides detailed instructions for operating the product efficiently. Access the manual to enhance your user experience with the Nortel 5100 Series. Download it now!

Share
Download
background image

Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference

426  

„

  Software licenses

213455-L, October 2005

GNU General Public License

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA  02111-1307 USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU 
General Public License is intended to guarantee your freedom to share and change free software--to make sure the 
software is free for all its users. This General Public License applies to most of the Free Software Foundation's 
software and to any other program whose authors commit to using it. (Some other Free Software Foundation software 
is covered by the GNU Library General Public License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to 
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that 
you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free 
programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to 
surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the 
software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the 
rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them 
these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal 
permission to copy, distribute and/or modify the software.

Also, for each author's protection and ours, we want to make certain that everyone understands that there is no 
warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to 
know that what they have is not the original, so that any problems introduced by others will not reflect on the original 
authors' reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors 
of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, 
we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.

The precise terms and conditions for copying, distribution and modification follow.

GNU GENERAL PUBLIC LICENSE

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0.

This License applies to any program or other work which contains a notice placed by the copyright holder saying 
it may be distributed under the terms of this General Public License. The “Program”, below, refers to any such 
program or work, and a “work based on the Program” means either the Program or any derivative work under 
copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with 
modifications and/or translated into another language. (Hereinafter, translation is included without limitation in 
the term “modification”.) Each licensee is addressed as “you”.

Summary of Contents for 5100 Series Release 2.3.3















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 5100 Series Release 2.3.3

Barracuda CloudGen Series Quick Start Manual preview
CloudGen Series
Brand: Barracuda Pages: 4
ZyXEL Communications ZyWALL 1050 Specifications preview
ZyWALL 1050
Brand: ZyXEL Communications Pages: 4
Elastix SIP Firewall Quick Installation Manual preview
SIP Firewall
Brand: Elastix Pages: 9
SecureLogix ETM System Installation Manual preview
ETM System
Brand: SecureLogix Pages: 212
Eli ADF-WG-A53 User Manual preview
ADF-WG-A53
Brand: Eli Pages: 24
Belkin F5U501I (Italian) Manual preview
F5U501I
Brand: Belkin Pages: 17
Belkin F5U501F (French) Manuel Du Propriétaire preview
F5U501F
Brand: Belkin Pages: 17
Belkin F5U501G (German) Manual preview
F5U501G
Brand: Belkin Pages: 17

Brands by name

Popular brands

Load more brands