Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference
58
Initial setup
213455-L, October 2005
As a security measure, this fingerprint is required in a subsequent step to ensure that no one
can impersonate the administrator.
25.
Click Finish to continue.
26.
When prompted, reboot the management station (see
Figure 23
).
Figure 23
Check Point setup complete page
Once the station is rebooted, installation of the SmartCenter Server and SmartConsole are
complete.
27.
Use the SmartDashboard to define a firewall object.
See
Defining a Firewall Object in the SmartDashboard on page 58
.
28.
Create a firewall policy test rule.
See
Creating a Firewall policy test rule on page 64
.
29.
Install firewall security rules.
See
Creating and installing Firewall security rules on page 66
.
This concludes installing and configuring the Management station tools.
Defining a Firewall Object in the SmartDashboard
1.
Launch the SmartDashboard software by clicking Start
Programs
Check Point
SmartConsole R60
SmartDashboard.
