Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference
Initial setup
59
213455-L, October 2005
2.
Log in using an administrator account (see
Figure 24
).
Figure 24
Check Point log in page
Enter one of the user name/password combinations configured during the installation of the
Management Server tools during
Step 14
on
page 55
. Also specify the IP address of the
SmartCenter Server and click OK.
N
OTE
—
Be sure you have added this IP address in the client
access list to allow SMART Client access to the firewall (see
Step 1
on page
page 47
).
3.
Verify the Check Point fingerprint.
At this point, the SmartDashboard will contact the Management Server. Since this is the first
contact, you will be prompted to verify the current fingerprint (see
Figure 25
).
Figure 25
Check Point fingerprint page
