Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference
94
Dynamic Host Configuration Protocol
213455-L, October 2005
3.
Configure DHCP server information.
4.
Display current configuration.
5.
Apply and save the changes.
>> #
/cfg/net/dhcprl/server 1
>> DHCP Server 1#
addr 10.1.1.1
(Set IP address of 1st DHCP server)
>> DHCP Server 1#
ena
(Enable the DHCP server)
>> DHCP Server 1# ../server 2
(Set IP address of 2nd DHCP server)
>> DHCP Server 2#
addr 10.1.1.2
(Set IP address of 2nd DHCP server)
>> DHCP Server 2#
ena
(Enable the DHCP server)
>> #
/cfg/net/dhcprl/cur
(Display current configuration)
>> DHCP Relay#
apply