30
Chapter 2 Installing the 8660 SDM
217314-B Rev 00
Figure 6
Removing a filler panel from an 8010co chassis
2
Pull the filler panel away from the slot.
Installing a chassis filler panel
To install a chassis filler panel:
1
Locate the slot where you want to install the filler panel.
2
Insert the filler panel into the slot (8010co chassis), or place the filler panel
over the slot (8003, 8006, or 8010 chassis).
3
Use a Phillips screwdriver to tighten the two captive screws.
10227FA
Fail
Pass